Research consultancy

 CHAPTER ONE

1.0 Introduction

The purpose of the study will be to modify slow sand filters. Slow sand filtration is an extremely efficient method for removing microbial contamination and will usually have no indicator bacteria present at the outlet. This chapter presents the background of the study, statement of the problem, objectives of the study, research questions, scope of the study, justification of the study, significance of the study.

1.1 Back ground to the study

The Universal access to safe drinking water is a fundamental need and human right. Securing access for all would go a long way in reducing illness and death, especially among children, there has been global effort by United Nations in ensuring that all people globally have access to clean , safe drinking water and since 2000, around 2 billion people have gained access to clean safe drinking water, however despite this progress there is still currently over one billion people globally lacking access to clean drinking water, 367 million who use unimproved sources and 122 million who still collect drinking water directly from rivers, lakes, and other surface water sources, while 282 million people use water source that  exceeds 30 minutes per water collection trip (Simelane et al., 2020).

Though all humans have never had full access to clean safe drinking water but there has always been a technology which can be used to make water clean and safe and this Engineering solution has been in existence for more than 150 years. Slow sand filtration has been an effective water treatment process for preventing the spread of gastrointestinal diseases for over 150 years, having been used first in Great Britain and later in other European countries, SSFs are still used in London and are currently most developing countries are adopting this technology as effective (Corcoran et al., 2010).

According to Baruth, (2015) slow sand filtration works primarily through biological activity that takes place on the surface of a sand bed. During the design and operation of slow sand filters, extra care needs to be taken in order to maintain an active biological population within the sand.  The ecosystem in a slow sand filter includes bacteria, protozoa such as rhizopods and ciliates, rotifers, copepods, and aquatic worms. A biological layer develops on the sand surface and is known as the schmutzdecke  (Huisman & Wood, 2016). Biological activity is stimulated by the accumulation of organic and inorganic debris and particulate matter on this layer (Pontius, 2013).Some straining occurs in the schmutzdecke and as the water seeps downward through the sand, the schmutzdecke breaks down some organic matter (GudarziZadeh, 2006).

The schmutzdecke therefore plays a major role in the removal of particulate matter. The water enters the top layer of sand, where inert suspended particles are physically strained out and biological action occurs, and the attachment of particles onto the surfaces of the sand grains takes place. Slow sand filters are the least complex type of granular media filter (Pontius, 2013).  They are typically housed in reinforced concrete structures, with a basin with a bed of relatively fine sand placed over support gravel (0.3–0.6 m in depth) and underdrain piping up to 0.9–1.5 m in length. The filtration rate is from 0.08 to 0.4 m/h. In the usual operating mode, influent water is introduced above the filter bed in a way that does not disturb the sand (Edzwald, 2011). In Europe, slow sand filtration is used in facilities supplying drinking water to large communities such as in London and Amsterdam (Crittenden et al., 2015).

Slow sand filtration is a type of centralized or semi-centralized water purification system. A well-designed and properly maintained slow sand filter (SSF) effectively removes turbidity and pathogenic organisms through various biological, physical and chemical processes in a single treatment step (Pontius, 2013).  Only under the prevalence of a significantly high degree of turbidity or algae-contamination, pre-treatment measures become necessary (UNESCO, 2009).  Slow sand filtration systems are characterized by a high reliability and rather low lifecycle costs. Moreover, neither construction nor operation and maintenance require more than basic skills. Hence, slow sand filtration is a promising filtration method for small to medium-sized, rural communities with a fairly good quality of the initial surface water source. As stated by the WHO, slow sand filtration provides a simple but highly effective and considerably cheap tool that can contribute to a sustainable water management system (Sanctuary & Tropp, 2015). Slow sand filtration is an extremely efficient method for removing microbial contamination and will usually have no indicator bacteria present at the outlet. SSFs are also effective in removing protozoa and viruses (WHO 2015.). If the effluent turbidity is below 1.0 nephelometric turbidity units (NTU), a 90 to 99% reduction in bacteria and viruses is achieved (NDWC 2000).

Clean water is essential for health and the living in general for humans. The access of clean water and sanitation facilities has increased around the world in the latest decade, but still, a child under the age of five dies every 20 seconds today, due to water-related diseases (Corcoran et al., 2010), For areas with widespread poverty and poor living conditions it has shown that the access of clean water is a fundamental base factor in order for people to rise from misery and get the area developing (Corcoran et al., 2010).

Nearly all of the people who lack clean Drinking water live in developing countries, especially in rapidly expanding urban fringes, poor rural areas, and indigenous communities (Bartram et al., 2005). Projections show that, by the year 2050, more than half of the world’s population will live under moderate water stress, with 80% of these located in developing regions. Even though the proportion of the global population using improved drinking water sources stood at 91% in 2015 (a Millennium Development Goal (MDG) target achieved by the year 2010), 785 million people still lacked basic drinking water services in 2017, while 159 million still collected drinking water directly from surface water sources (58% of whom live in sub-Saharan Africa). As many nations work towards meeting target 6.1 of Goal 6 of the Sustainable Development Goals (SDGs), aimed at achieving universal and equitable access to safe and affordable drinking water for all by the year 2030, it is important to document the determinants of access to improved drinking water sources in order to identify key areas and disparities that nations still need to address as they strive to meet this target (Droogers et al., 2012).

Like most of the Sub-Saharan African countries currently, 8 million Ugandans lack access to safe water and 27 million do not have access to improved sanitation facilities. Further, due to disparities in water access in Uganda, urban people living in poverty pay as much as 22 percent of their income to access water from water vendors (Gärtner et al., 2021). Much of Uganda is open water and swampland with undrinkable water, meanwhile, high demand and poor management lead to shortages of clean groundwater facilities are under strain in towns and cities, and the springs and wells that rural communities rely on are mostly used up.

The residents of Kamuli Municipality are also facing challenge with water supply, this is despite the district relying on the slow sand filtration engineering method. The capacity of water supply was designed for 10,000 residents however currently Kamuli Municipality population has increased to more than 67,800 (UBOS, 2020) this has therefore made water accessibility to the ever-increasing population of the Municipality rather difficult. It is against this background that this study intends to modify slow sand filters.

1.2 Problem statement

The lack of access to clean drinking water has been one of the main challenges of Kamuli municipality ever since its creation in 1974 when it was curved out of Busoga district. Currently the population of Kamuli Municipality is 67,000 which is far above the current water capacity of the Municipality which stands at 10,000 liters daily.

Though the Kamuli Municipality currently has slow sand filter system to provide water to the Municipality, the capacity is not enough to provide enough water to the ever increasing number of residents in the Municipality for example in 2002 the population was 11, 350, while in 2012 the population was 50,800 and currently the population is 67,000 (UBO, 2020), however despite the increase in the population the water capacity has still remained the same in Kamuli Municipality  at 10,000 liters daily for over 30 years, this is way below the total requirements of the Municipality in the current state. This therefore has prompted the study on the modification of slow sand filters in Kamuli Municipality.

1.3 Objectives of the study

1.3.1 Main objective of the study

To modify slow sand filters.

1.3.2 Specific Objectives of the study

  1. To improve the efficiency of the existing slow sand filter system.
  2. To determine different ways of increasing accessing of water
  • To enhance the capacity of slow sand filters to provide enough water.

1.4 Research questions

  1. How to improve the efficiency of the existing slow sand filter system Kamuli municipality?
  2. What are different ways of increasing accessing of water in Kamuli municipality?
  • To enhance the capacity of slow sand filters to provide enough water Kamuli municipality.

1.5 Justification of the study

Slow sand filtration may be not only the cheapest and simplest treatment process to operate and maintain but also the most efficient under appropriate circumstances. Although slow sand filters are effective in treating high-quality raw water, there are several limitations which include significant reductions in filter run lengths if raw water turbidity and algal content exceed relatively low levels, poor organic precursor removals, and relatively long filter cleaning downtimes and ripening periods.

1.6 Significance of the study

  1. The study will enable the Engineers have information on How to improve slow sand filters.
  2. Through the study it will be possible for Kamuli Municipality to provide enough water for the current demand, Immediate and future Demand.
  • The study will enable the future scholars have information on how to modify the slow sand filters to be in position to improve its performance in key dimension of quality and quantity.
  1. The research may be used by water treatment designers and as well as water engineers to guide them in the process of practicing rapid filtration in removing bacterial contamination.
  2. It is hoped that the study will encourage greater use of excellent and reliable method of slow sand filtration in developing countries like Uganda.
  3. The study may be useful to future researchers intending to carry out future research in the related field.
  • The research may help the government to formulate the policies related to the slows sand filtration in Uganda.

 

 

1.7 Scope of the study

1.7.1 Subject Scope

The study will be based on the modification of slow sand filters. The study will specifically examine the elements of slow sand filters, the mechanisms of filtration and to observe the purification in a slow sand filter.

1.7.2 Time Scope

The study will take a period of 6months. The period of data will be considered for literature review will range from 2010 -2020

1.7.3 Geographical Scope

The study will be carried out in Kamuli Municipality in Kamuli District. Kamuli is a town in the Eastern Region of Uganda. It is the main municipal, administrative, and commercial centre of Kamuli District and the district headquarters. The coordinates of Kamuli Town are 0°56’42.0″N, 33°07’30.0″E (Latitude: 0.9450; Longitude: 33.1250). Kamuli District is bordered by Buyende District to the north, Luuka District to the east, Jinja District to the south, and Kayunga District to the west. The district headquarters at Kamuli are approximately 74 kilometres (46 mi), by road, north of Jinja, the largest city in the Busoga sub-region.

 

 

 

 

 

 

 

 

 

 

 

 

1.8 Conceptual frame work

Modifications

v  Creation of alternative treatment design

v  Expansion of the system design

v  Upgrading the treatment design

 

Slow sand filter

v  Supernatant water

v  Gravel support

v  Filter bottom

v  Sand bed

 Source: modified by the researcher

 

A well designed and properly maintained slow sand filter containing Supernatant water Gravel support Filter bottom and Sand bed effectively removes turbidity and pathogenic organisms through various biological, physical and chemical processes in a single treatment using different modifications.

1.9 Chapter summary

The chapter presents the back ground to the study; the main objective of the study is to investigate the modification of slow sand filters, the specific objectives of the study are: to examine the elements of slow sand filters, the mechanisms of filtration and the purification in a slow sand filter. The study will be carried out in Kamuli Municipality in Kamuli District.

 

 

 

 

REFERENCES

Simelane, M. S., Shongwe, M. C., Vermaak, K., & Zwane, E. (2020). Determinants of households’ access to improved drinking water sources: a secondary analysis of Eswatini 2010 and 2014 multiple indicator cluster surveys. Advances in Public Health, 2020.

Droogers, P., Immerzeel, W. W., Terink, W., Hoogeveen, J., Bierkens, M. F. P., Van Beek, L. P. H., & Debele, B. (2012). Water resources trends in Middle East and North Africa towards 2050. Hydrology and Earth System Sciences, 16(9), 3101-3114.

 

Gärtner, N., Germann, L., Wanyama, K., Ouma, H., & Meierhofer, R. (2021). Keeping water from kiosks clean: Strategies for reducing recontamination during transport and storage in Eastern Uganda. Water research X, 10, 100079.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

RSS
Follow by Email
YouTube
Pinterest
LinkedIn
Share
Instagram
WhatsApp
FbMessenger
Tiktok